Automatic roller ironer with roller speed control S-140/25 AVL

Follow these simple steps to get professional-quality results with an automatic industrial roller ironer

Here are some recommendations for how to use an automatic industrial roller ironer:

1. Follow the manufacturer's instructions for setup and operation. These instructions will vary depending on the specific model of the machine, so it's important to read and follow them carefully in order to ensure safe and proper use.
2. Make sure the machine is properly plugged in and switched on before use.
3. Preheat the rollers according to the manufacturer's instructions. This will typically take several minutes.
4. Adjust the roller speed according to the type and thickness of the fabric being ironed.
5. Feed the fabric through the rollers, taking care to align it evenly and avoid bunching or wrinkling.
6. Monitor the progress of the ironing process and make any necessary adjustments to the roller speed or temperature as needed.
7. When finished, turn off the machine and allow the rollers to cool before unplugging and cleaning the machine according to the manufacturer's instructions.
8. Use caution when handling the machine and the hot rollers, as they can cause burns if touched while still hot.
9. Regularly maintain and clean the machine according to the manufacturer's instructions to ensure optimal performance and longevity.

By following these recommendations, you can use your automatic industrial roller ironer safely and effectively to achieve professional-quality results on a wide range of fabrics.

Specification

Dimensions (WDH): 1800x420x1005 mm

Total power: 8.63 kW

Heating power: 8.4 kW

Power supply: 400V/3/50 Hz

Capacity (H.R. 10-15%); (H.R. 20-25%): 40 kg/h; 25/30 kg/h; 12 kg/h

Roller: Ø 250x1400 mm

Speed roller: 2 - 4 m/min

Air consumption: 70 m3/h

Flue outlet: 55 mm

Net weight: 135 kg

Packaging dimensions: 500x1880x1150 mm

Gross weight: 140 kg