The BEERMATIC DUAL TAP is a fully automatic draft beer dispenser with a foaming mechanism. The hands-free portion control allows a preset quantity of chilled draft beer and foam to be served – always at the perfect temperature and with just the right amount of foam. Beer after beer after beer.
1. Press once to dispense
It’s as simple as that. Press the dispense button once to draft the preset amount of beer.
2. Tilt-pouring
The dispensing operation is tilting the glass to the right angle to ensure a perfectly poured beer.
3. Portion control
The portion size can be preset to pour the same quantity every time. No overflow of beer or foam.
4. Foam control
The amount of foam can be set and adjusted for both taps individually.
5. Internal cooling system
Ambient-temperature beer is cooled down as it flows through the beer circuits.
6. Two beer circuits
This dual-tap model has two circuits, so two different types of beer can be connected and poured simultaneously.
7. Counting/log function
The display shows the number of beers poured. Via the user settings, you can configure the number of beers, based on the volume of your glasses.
8. Automatic or manual
It is a simple process to switch from automatic to manual dispense mode or vice versa via the operation panel.
9. Empty-keg-alert
A “sold out” lamp lights up in the control panel as soon as there is less than 0.5 l left in the beer circuit.
Circuit: Dual Tap model with 2 beer circuits (for connection of 2 beer kegs)
Cooling system: Internal
Refrigeration system: Air cooled
Dispensing speed: 34-49 ml/s (2.0 – 3.5 bar)
Dispensing capacity: 65 l after initial freeze down (30 ◦C =>8 ◦C/4hrs) additional 10.2 l after 45 min recovery time
Operating conditions limitations: Ambient temperature range: 5°C / 32°C Voltage range: Rated voltage ± 6%
Outside dimensions (WxDxH): 367 x 674 x 764 mm
Installation space (WxD ): 460 x 724 mm
Net weight/Gross weight: 50 / 56 kg
Exterior: Drive cover: ABS Plastic / Cabinet: Painted steel
Refrigerant: R134a/175g
Electrical connection: 220-240V/50Hz
Electrical consumption: 24h 285 Watt (Power factor 74%)
CE marking: Yes (60Hz excluded)
